Velodyne MicroVee Bedienungsanleitung PDF herunterladen (Seite 15)

www.velodyne.com

MicroVee User’s Manual - 9

SPEAKER-LEVEL CONNECTION - OPTION C

Figure 4 shows an easy way to connect your Velodyne subwoofer directly to your receiver or integrated

amplier if it lacks line-level outputs. You may also connect your satellites directly to your receiver or amplier

along with the subwoofer. Your receiver or amplier will not notice the additional load of the subwoofer due to

the high input impedance.

When the subwoofer is installed in this fashion, your satellite speakers will be crossed over at 120 Hz which

removes the lower bass frequencies from your speakers, enabling them to do a better job reproducing the

higher frequencies.

Figure 2. Installation Using LFE Line-Level Inputs

1 2 ... 10 11 12 13 14 15 16 17 18 19 20 ... 23 24

Keine Kommentare

Velodyne MicroVee Bedienungsanleitung Seite 15