Velodyne SC-IWBB Bedienungsanleitung PDF herunterladen (Seite 8)

www.velodyne.com

2 -SC-IW Installation Manual

The SC-IW consists of two cabinets — the “driver module” and the “back box.” (a.k.a. the “Enclosure”). Unlike

other in-wall products where a back box may be optional, the SC-IW requires both enclosures, unaltered, for

every installation. In new construction situations, the back box is in installed rst (for example, at the framing or

rough out stage), and the driver module is installed later in the trim out stage. In retrot situations both boxes

are typically installed together.

The driver module assembly is shown below. It uses a unique bracing system in that the driver acts as the

“internal bracing structure” for the speaker enclosure.

The in-wall back box contains internal bracing to minimize cabinet ex and wall vibration.

The driver module and the back box are connected through two rubber conduits, sealed with supplied hose

clamps. This linking system provides the installer the exibility to either install the two boxes together in the wall

or separately prior to installation.

1 2 3 4 5 6 7 8 9 10 11 12 13 ... 63 64

Keine Kommentare

Velodyne SC-IWBB Bedienungsanleitung Seite 8