Velodyne Wi-Q Bedienungsanleitung PDF herunterladen (Seite 9)

Setup Wi-Q User’s Manual

Step 2: Set Up WiConnect System Transmitter

Note: The Wi-Q transmitter model is the WiConnect System Transmitter. The Wi-Q subwoofer

must be within 50 feet (15 meters) of the transmitter to be able to receive the wireless signal. Also,

make sure that the same CHANNEL is selected on both the transmitter and the subwoofer.

1. Do one of the following to connect the transmitter to your audio receiver.

• For Audio Receivers with LFE/SUB Output (most common): This setup requires one RCA

cable. Plug one end of the RCA cable into the LFE input on the transmitter and plug the other

end into the LFE or SUB output on your audio receiver.

• For Audio Receivers or Zones without LFE/SUB Output or Connection (less common):

This setup uses one stereo RCA cable. Plug one channel of the RCA cable into the R input on

the transmitter and the R output on your audio receiver. Plug the other channel of the RCA cable

into the L input on the transmitter and the L output on your audio receiver.

Figure 3: Transmitter connections

2. Plug the power adapter into the back of the transmitter. Plug

the other end of the adapter into a power outlet.

3. Make sure the CHANNEL setting on the transmitter matches

the CHANNEL setting on the back of the subwoofer. For

example, choose CHANNEL 2 in both places. You have four

channels to choose from.

Figure 4: Channel selections

LFE

ente

urroun

12v

rigge

LFE

INPUT

1 2 3 4

CHANNEL

LFE/SUB connection

LFE

INPUT

1 2 3 4

CHANNEL

LFE

Front

ente

urroun

L R

Left/Right connection (without LFE/SUB)

Power

adaptor jack

Power

adaptor

jack

L R LFE

INPUT

1 2 3 4

CHANNEL

DC IN

Channel selector

1 2 3 4 5 6 7 8 9 10 11 12 13 14 ... 28 29

Kommentare zu diesen Handbüchern

Keine Kommentare

Velodyne Wi-Q Bedienungsanleitung Seite 9

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Audio Velodyne Wi-Q